Specification

    * Mfr Part Number: ATX-400PN-B204
    * Features
          o 20/24pin Main Power connector; SATA connector
          o Complied with ATX12V 2.0 standard
          o High efficiency and reliability
          o Remote On/Off function
          o Internal 12V DC 120mm Ball Bearing fan included
          o Noise Killer (Thermal fan speed control function)
          o Low noise and ripple
          o Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
          o Output over voltage, short circuit, and over current protection
          o 100% Hi-pot, ATE, and burn-in tested
          o Re-settable power shut down
          o Approved by UL 60950, IEC 60950, TUV EN60950, NEMKO (CB Report)
    * Input:
          o Input Range: 100 ~ 132 Vrms or 200 ~ 264 Vrms, Manual selection
          o Frequency: 47 ~ 63 Hz
          o Input Current: 8.5A (RMS) @ 115Vrms/60Hz, 5A (RMS) @ 230Vrms/50Hz
          o Inrush Current: 100A Max cold start, 120A Max warm start measured at 264Vrms/50Hz
    * Output:
          o Total Watts: 400W
          o +3.3V and +5V total output not exceed 150W
          o When +3.3V is load to 30A, the +5V maximum load is 10A
          o When +3.3V is load to 3.0A, the +5V maximum load is 28A
          o +12V1DC, 12V2DC total power not exceed 348W
          o +3.3V, +5V, +12V1DC, and +12V2DC total output not exceed 385W
    * Dielectric Withstand: Input to frame ground 1800V AC for 1 second
    * Efficiency: 70% minimum measured at nominal AC main voltage and frequency with maximum loads on all outputs
    * Rise Time: Less than 20ms on all outputs
    * Hold-up Time: 17ms minimum at nominal input voltage
    * Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
    * Leakage Current: Not exceed 3.5mA
    * MTBF: 100,000 hours on maximum load at +25°C
    * Dimension (WxLxH): 6 x 5.5 x 3.4 inch / 150 x 140 x 86 mm