Specification

    * Mfr Part Number: SMART3000RM2U
    * Voltage compatibility: 120 V AC
    * Frequency compatibility: 60 Hz
    * Output:
          o Output volt amp capacity: 3000 VA
          o Output watt capacity: 2250 watts
          o Output nominal voltage: 120 V AC
          o Output voltage regulation: Line mode - Sine wave line voltage 120V (-18% / +8%); Battery mode - Sine wave output 120V +/-5%
          o Output frequency regulation: Line mode - Passes line frequency of 60Hz +/-10%; Battery mode - Inverter output regulated to 60Hz +/-0.5Hz
          o Outlet quantity / type: 4x NEMA 5-15R; 4x NEMA 5-20R; 1x NEMA L5-30R
          o Overload protection: Resettable circuit breaker
    * Input:
          o Maximum input amps: 24 A
          o Input connection type: NEMA L5-30P
          o Input cord length: 10 ft., 10 gauge
          o Recommended electrical service: 30A 120V
    * Battery:
          o Full load runtime: 4 minutes (3000 VA)
          o Half load runtime: 13 minutes (1500VA)
          o Expandable battery runtime: Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack compatible)
          o DC system voltage: 48 V DC
          o Typical battery lifespan: 3~6 years, depending on usage
          o Battery recharge rate: 2~4 hours to 90%
    * Voltage Regulation:
          o Overvoltage correction: Input voltages between 128 and 147V AC are reduced by 12%
          o Direct pass through: Input voltages between 105 and 127V AC are passed on to connected equipment unchanged
          o Brownout correction: Input voltages between 95 and 104V AC are boosted by 12%
          o Severe brownout correction: Input voltages between 79 and 94V AC are boosted by 24%
    * Surge / Noise Suppression:
          o AC surge suppression: 480 joules
          o AC suppression response time: Instantaneous
          o EMI / RFI AC noise suppression: Yes
    * Communications:
          o Network monitoring port: 4x built-in monitoring ports, 2x USB, 2x DB9
          o SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
          o WatchDog compatibility: Yes
    * Line / Battery Transfer:
          o Transfer time from line power to battery mode: 2~4 milliseconds
          o Low voltage transfer to battery power: 79V (resets to line power as voltage increases to 83V)
          o High voltage transfer to battery power: 147V (resets to line power as voltage decreases to 144V)
    * Certifications: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)
    * Special Features:
          o EPO port: Includes RJ11 EPO (emergency power off) port and interconnection cable
          o TVSS grounding: Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories requiring a safe grounding point
          o Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
          o Appearance: Attractive gray rackmount housing, optional use 2U black front bezel included to enable black color appearance
    * Physical:
          o Material of construction: Steel
          o Form factors supported: Rack/Tower (2U)
          o Cooling method: Built-in cooling fan
          o Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off
          o Dimensions (WxDxH): 17.5 x 19 x 3.5 inch / 44.5 x 48.3 x 8.89 cm
          o Weight: 64 lbs / 29.1 kg