Specification

    * Mfr Part Number: ATX-300GT-B
    * Feature:
          o Ball Bearing 300W P4 ATX (20pin/4pin)(Intel & AMD website listed)
          o Complied with ATX and ATX12V standard
          o High efficiency and reliability
          o Remote On/Off function
          o Internal 12V DC fan included
          o Noise Killer (Thermal fan speed control function)
          o Low noise and ripple
          o Complies with FCC part 15 subpart J class B and CISPR 22 Class B
          o Output over voltage, short circuit, and over current protection
          o 100% Hi-pot, ATE, and burn-in tested
          o Re-settable power shut down
          o Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950,Nemko (CB Report)
          o With I/O (On/Off) switch
    * Input Characteristics
          o Input Range: 95~132/180~264V AC, Manual-select
          o Frequency: 47~63Hz
          o Input Current: 10A (RMS) @115V AC, 5A (RMS) @230VAC
          o Inrush Current: 80A Max for 132V AC Cold Start
    * Output Characteristics
          o +5V and +3.3V total output not exceed 175W
          o When +3.3V is load to 20A, the +5V maximum load is 21.8A
          o When +3.3V is load to 7.5A, the +5V maximum load is 30A
          o +3.3V, +5V, and +12V total output not exceed 280W
    * Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
    * Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
    * Rise Time: Less than 20 ms on all outputs
    * Hold-up Time: 16ms minimum at 115V/60Hz; 20 ms minimum at 230V/50Hz input voltage
    * Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
    * Leakage Current: Less than 3.5mA
    * Dimension(WxDxH): 5.9 x 5.5 x 3.4 inch / 150 x 140 x 86 mm