Specification

    * Mfr Part Number: FSP200-50PL-B
    * Features
          o Complied with Flex ATX and ATX12V standard
          o High efficiency and reliability
          o Remote On/Off function
          o Internal 12V DC fan included
          o Noise Killer (Thermal fan speed control function)
          o Low noise and ripple
          o Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
          o Output over voltage, short circuit, and over current protection
          o 100% Hi-pot, ATE, and burn-in tested
          o Re-settable power shut down
          o Approved by UL 1950, CSA C22.2 Level 3
    * Input:
          o Input Range: 90 ~ 132 / 180 ~ 264V AC, Manual Selection
          o Frequency: 47 ~ 63 Hz
          o Input Current: 5A (RMS) @ 115V AC, 3A (RMS) @ 230V AC
          o Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
    * Output:
          o Totao Watts: 200 W
          o +5V and +3.3V total output not exceed 75W
          o +3.3V, +5V, and +12V total output cannot exceed 186.5W
    * Dielectric Withstand: Input to frame ground 1800V AC for 1 second
    * Efficiency: 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
    * Rise Time: Less than 20ms
    * Hold-up Time: 17ms minimum at nominal input voltage
    * Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
    * Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
    * MTBF: 100,000 hours on maximum load at +25°C degree
    * Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm