Specification

    * Mfr Part Number: FSP200-50SNV
    * Feature:
          o Complied with SFX and SFX12V standard
          o High efficiency and reliability
          o Remote On/Off function
          o Manual Voltage Switch
          o Internal 12V DC 60mm fan included
          o Noise Killer (Thermal fan speed control function)
          o Low noise and ripple
          o Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
          o Output over voltage, short circuit, and over current protection
          o 100% Hi-pot, ATE, and burn-in tested
          o Re-settable power shut down
          o Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
    * Input:
          o Input Range: 95~132/190~264V AC, Manual selection
          o Frequency: 47 ~ 63 Hz
          o Input Current: 7A (RMS) @115V AC, 4A (RMS) @230V AC
          o Inrush Current: 40A Max for 115V AC Cold start
    * Output:
          o Total: 200 W
          o +5V and +3.3V total output not exceed 118W
          o +3.3V, +5V, and +12V total output cannot exceed 182.5W
          o When +3.3V is load on 16.7A, the +5V maximum load is 12.6A
          o When +3.3V is load on 11.5A, the +5V maximum load is 16A
    * Connectors: 1x 20pin; 1x 4pin P4; 3x Peripheral; 1x Floppy
    * Dielectric Withstand: Input to frame ground 1800V AC for 1 second
    * Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
    * Rise Time: Less than 20ms on all output
    * Hold-up Time: 16.6ms minimum at 115V/60Hz; 20ms minimum at 230/50Hz input voltage
    * Power Good Signal: Power on delay time 100~500 ms, off delay 1ms minimum (TTL and CMOS compatible)
    * Leakage Current: Not exceed 3.5mA
    * MTBF: 100,000 hours on maximum load at +25°C
    * Compatible Case: Athenatech A100; CA-ST11US & CA-ST12US
    * Dimension (WxLxH): 3.9 x 5 x 2.5 inch / 100 x 125 x 63.5 mm