Specification * Mfr Part Number: FSP180-51NIV-B
* Features:
o Complied with SFX and SFX12V standard
o High efficiency and reliability
o Remote On/Off function (Without I/O Switch)
o Internal 12V DC 80mm ball bearing fan included
o Noise Killer (Thermal fan speed control function)
o Low noise and ripple
o Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
o Output over voltage, short circuit, and over current protection
o 100% Hi-pot, ATE, and burn-in tested
o Re-settable power shut down
o Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
* Description: 180 Watts SFX12V Switching Power Supply (For Pentium 4)
* Input:
o Input Range: 95~132/190~264V AC, Manual selection
o Frequency: 47~63Hz
o Input Current: 6A (RMS) @115V AC, 3A (RMS) @230V AC
o Inrush Current: 50A Max for 132V AC Cold start
* Output: (Output Voltage @ Minimum Load @ Maximum Load @ Ripple & Noise)
o +3.3V @ 0.5A @ 11.5/16.7A @ 50mV P-P
o +5V @ 1.0A @ 16/12.6A @ 50mV P-P
o +12V @ 2.0A @ 10A @ 120mV P-P
o -12V @ 0.0A @ 0.3A @ 120mV P-P
o +5Vsb @ 0.0A @ 2.0A @ 50mV P-P
o Note:
+ +5V and +3.3V total output not exceed 118W
+ +3.3V, +5V, and +12V total output cannot exceed 165W
+ When +3.3Vis load on 16.7A, the +5V maximum load is 12.6A
+ When +3.3Vis load on 11.5A, the +5V maximum load is 16A
* Dielectric Withstand: Input to frame ground 1800V AC for 1 second
* Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
* Rise Time: Less than 20ms on all output
* Hold-up Time: 16.6ms minimum at nominal input voltage
* Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
* Leakage Current: Less than 3.5mA
* MTBF: 100,000 hours on maximum load at +25°C
* Dimension (WxLxH): 3.9 x 4.9 x 3 inch / 100 x 125 x 76.4 mm
|
Our Online-Shop 
