Specification

    * Mfr Part Number: FSP150-50PL1R
    * Features:
          o 20pin main connector
          o RoHS Ready
          o Complied with Flex ATX standard
          o Active Power Factor Correction Meeting with EN61000-3-2
          o High efficiency and reliability
          o Remote On/Off function
          o Internal 12V DC ball bearing fan included
          o Noise Killer (Thermal fan speed control function)
          o Low noise and ripple
          o Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
          o Output over voltage, short circuit, and over current protection
          o 100% Hi-pot, ATE, and burn-in tested
          o Re-settable power shut down
          o Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
    * Input:
          o Input Range: 90~265V AC, Full Range Input
          o Frequency: 47~63Hz
          o Input Current: 4A (RMS) @ 115V AC, 2A (RMS) @230V AC
          o Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start
    * Output:
          o Total Watts: 150 W
          o +5V and +3.3V total output not exceed 85W
          o +12V, +3.3V, +5V, and +12V will have the regulation ±10% when all load take off
    * Dielectric Withstand: Input to frame ground 1800V AC for 1 second
    * Efficiency: 68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
    * Rise Time: Less than 20ms
    * Hold-up Time: 17ms minimum at nominal input voltage
    * Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
    * Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
    * MTBF: 100,000 hours on maximum load at +25°C
    * Dimension (WxLxH): 3.2 x 6 x 1.6 inch / 81.5 x 150 x 40.5 mm